RIKON POWER TOOLS
We are an authorized distributor for Rikon Power Tools. To learn more about one of their lathes or other machines, give us a call at 1-866-795-3462 or email us at: info@bowriverwoods.com
BOWL TURNING PEDESTAL |
|
|
Swing over toolrest beam: Swing over floor: |
up to 36" Ø (915mm) |
OPTIONAL "STANDARD" TAILSTOCK FITTED |
|
|
Swing over bed: Max distance between centres: |
up to 26"Ø (660mm) up to 31" (790mm) |
OPTIONAL "SHORTBED" TAILSTOCK FITTED |
|
|
Swing over bed: |
up to 27"Ø (690mm) up to 24" (610mm) |
SPEED RANGE |
|
|
2 hp/1500 watt, 240volt, 3 phase continuously rated motor wired through phase inverter for use with 1 phase (domestic) supply (3 hp /2250 watt motor with commensurate electronics optional.) |
|
MANDREL SHAFT |
|
|
60mmØ x 500mm o/a length. Bored through for vacuum chuck. 3 M.T. swallow. Fitted with 8" (200mm) Ø rear handwheel. Nose fitting: 3 point 'bayonet' pattern for complete security in forward/reverse (Thread adaptors available for any required spec.) |
|
CONTROLS |
|
|
Housed in magnetically backed box on 2 metre, 24volt lead. Provides: Stop/Start; Fwd/Rev; Fast/Slow braking and acceleration to pre-selected speed; 10 revolution speed selection dial with lock; System diagnostic OK and Fault lights. (Footswitch optional.) |
|
TOOLREST BEAM |
|
|
"Floating" beam clamps in required location by internal folding-wedge mechanism operated by external crank handle. Gives complete range of toolrest positioning options around any form up to 36"Ø x 26" length. (Floorstanding toolrest holder optional.) |
|
DIMENSIONS |
|
|
Footprint of pedestal lathe: 21" x 20" (526 x 500mm) Footprint with HD tailstock added: 65" x 25" (1650 x 640mm) Overall height: "H" model, 52" (1325mm) "L" model, 49" (1245mm) Turning axis (centre) height above floor: |
21" x 20" (526 x 500mm)
"H" model, 52" (1325mm) |
WEIGHT |
|
|
Pedestal lathe with toolrest beam: As Above with HD tailstock fitted: As above with shortbed tailstock fitted: |
583 lbs (265 kgs 847 lbs (385 kgs) 689 lbs (304 kgs) |
FINISH |
|
| Dark green, electrostatic powder coat oven baked at 200ºC | |
STANDARD EQUIPMENT |
|
|
12" (300mm) toolrest; 5½ " Ø (140mm) steel faceplate; Indexing/shaft locking tool; Centre ejecting bar; 250ml VB Lube; Allen Keys; Comprehensive Owner's Manual. |
|
